Guangzhou Honghe Building lndustrial co.,LTD  

Gold Index: 9148

You are here: home  > Strong flexibility Heat Reflecting Anti-sunshine Coating

Strong flexibility Heat Reflecting Anti-sunshine Coating 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to Basket Add to My Favorites
HiSupplier Escrow
Share |

Product Detail


Heat Reflecting Coating2-3 square meters/KG/coat (two lay


Heat Reflecting Coating
2-3 square meters/KG/coat (two layer)
High reflectivity
High emissivity,
Low heat capacity

Strong flexibility Heat Reflecting Anti-sunshine Coating

Package: 20KG/drumColour: White

Application Method

Roller

Spray

Theoretical coverage :

3 to 5 square meters/KG/coat(two layer)

3 to 5 square meters/KG/coat(Two layer)

The practical consumption may vary with substrate condition, construction methods, environment and other factors.

Storage Condition: Store in cool, dry and ventilated place,away from fire.

Product Introduction:

SAILI Heat insulation flexibility exterior coating adopts advanced aerospace adiabatic technology. It can form excellent adiabatic coating with three high and one low properties: high reflectivity, high emissivity, high heat resistivity and low heat capacity, which can low the surface and inner temperatures of the substrate, and cut down by thirty percent of the electrical energy consumed by airconditioner. The energy-saving effect is obviously.

Scope of application:

Can be used for the surface of concrete floor and walls, container need to isolate the solar thermal radiation.

Theoretical consumption of paint: 3~4 Square meter/L, (two layer, 0.2~0.3mm dry film thickness the practical dosage may vary with substrate condition, construction methods and other factors.

Dilution:No more than ten percent of water needs to be added to dilute for the sake of application convenience.

Repainting time: Dry for more than two hours before subsequent application (25C, seventy percent of relative humidity).

Color:White is recommended, and can be adjusted with water-based colourant if necessary.

Construction methods: Can be used by brushing, rolling or spraying.

Construction procedure of wall: Construct exterior wall putty for 2~3 times brush exterior wall special primer 1 time brush thermal insulation coatings 2 times acceptance checks.

Substrate requirements: Substrate surface should be clean, dry, smooth, firm, no grease and no rust, etc., the water content of cement-based surface should not exceed 10%, and PH value should below 10.

Application conditions: Application temperature 5~40 C, the maximum relative humidity should be less than 85%. Avoid application on windy, rainy, foggy and high air temperature weather. After coating, keep away from rain more than 3 hours.







bigPhoto
 Mr. Deng

Tel: 86-020-8800230
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Guangzhou Honghe Building lndustrial co.,LTD [China (Mainland)]


Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (202)